F-4
Carbon Steel Filter Dryer
|
|
- Designed for use with pneumatic controllers
or other pneumatic instruments
- Two part polyurethane epoxy coating to
resist corrosion
- Silica gel desiccant for effective removal
of aerosols (other desiccants
available)
- Easily replaced "spin on'' canister
type
filter cartridge
- Sulfur-Gon available for H2S
- Filtration to 4 microns
- 1,500 psi maximum working pressure
- 200 °F (94 °C) maximum temperature
- Flow rate up to 50 cfm
- 1/4 " NPT connections standard. other
sizes
available |
F-5 Carbon
Steel Filter Dryer
|
|
-
Designed for use with pneumatic controllers
or other pneumatic instruments
- Silica gel desiccant for effective removal
of
aerosols (other desiccants available)
- Activated charcoal for removal of liquid
hydrocarbons and other contaminants
- Sulfur-Gon available for H2S
- Easily replaced "spin on" canister
type filter
cartridge
- Filtration to 4 microns
- 1.500 psi maximum working pressure
- 200 °F (94 °C) maximum temperature
- Flow rate up to 50 cfm
- 1/4 " NPT connections standard, other
sizes
available |
F- 15 Carbon
Steel Filter Dryer
|
|
- Designed for use with pneumatic controllers
or other pneumatic instruments
- Easily replaced "spin on'. canister
type filter
cartridge
- Silica gel desiccant for effective removal
of
aerosols (other mediums available)
- 3,200 psi working pressure design with
high
pressure hammer Union closure
- 200 °F (94 °C) maximum temperature
- Flow rate Up to 50 cfm
- 1/4" NPT connections standard, other
sizes
available Upon request |
|
F- 19 Stainless Steel
Filter Dryer
|
|
- Designed for use with small pneumatic
instrumentation package requirements
- Silica gel desiccant for effective removal
of
moisture
- Easily replaced "spin on" cartridge
Carbon steel or stainless steel
designs
available
- 1.500 psi maximum working pressure
- 200 °F (94 °C) maximum temperature
- Flow rate up to 50 cfm
- 1/4 " NPT connections (standard)
|
F-23 Low Pressure Aluminum Filter Dryer
|
|
- Designed for use with low pressure
instrumentation
- Lightweight aluminum construction.
anodized for protection
- Easily replaced "spin on', filter
cartridge
- Silica Gel desiccant for effective removal
of
moisture and 4 micron filtration
in one unit
- 200 psi maximum working pressure
- 200 °F (94 °C) maximum temperature
- Flow rate up to 50 cfm
- 1/4 " NPT connections (standard)
|
DA- 1 Dehydration Assembly
|
|
- Ideal protection for pneumatic controllers
- Incorporates two F-5 filters in parallel
with
common inlet and outlet ports
- Offset regulation prevents instrument
supply freeze-up
- Filter cartridges can be changed without
shutdown
- Complete with instrument regulators (brass
standard; stainless steel. carbon
steel or
aluminum optional)
- 1.500 psi maximum working pressure
- 200 °F (94 °C) maximum temperature |
|
Instrument Regulators/
