Application
The LSSM-1 sampler can be used with all products
that are compatible with the materials of construction
and seal material.
Pressure Rating
Line pressures up to 5,000 psi (345 Bar)
Temperature Rating
From -4 to +248 °F (-20 to + 120 °C)
Sample Sizes
Vanishing Chambers collection heads available
in nominal sizes 0.2cc, 0.5cc,1.0cc and 1.5cc.
Alternatively available with 'B'- head in nominal
sizes 0.5cc, 1.0cc,2.0cc, 3.0cc and 4.0cc.
Sampling Rate
Up to 15 samples per minute with suitable instrument
air system.
Sampler Actuation
Double or single acting air piston motor rated
at 120 psi (8 Bar). Both actuating and release
time should be 2 sea minimum. Sampler actuation
can be either time or flow proportional.
|
|
Materials
316 stainless steel construction with Viton,
PTFE and Fluorotrel seals.
Connections
Inlet
and return, sample outlet and airconnections 1/4"
NPT.
Required Utilities
Instrument
air 60 to 120 psi (4 to 8 Bar)
dependent on line pressure. Air
consumption 0.1 scf/grab @ 60 psi (2.9
nl/grab @ 4.2 Bar) as single acting; 0.25
scf/grab @ 60 psi (7.1 nl/grab @ 4.2 Bar) as
double acting.
Weight
22
Ibs.
10 Kg.
Non-standard designs available
upon request
Options Available (not limited to)
- 1/2" or 1" NPT in-and outlet
- 1/2", 1" or 1 1/2" flanged connections
- 300#, 600#, 900#, or 1500# RF/RTJ
- Other materials available.
- 'B' type collection head
- 'B'- relief, sand relief or balanced relief
- Certificates (material 3.1 B. hydro, functional,
conformity etc.)
Other Welker Products
- In-line
probe samplers
- Constant pressure cylinders
- Cylinder carrying cases
- Sample take-off probes
- Probe regulators
- Control valves |
